Heat treated glass tape
Description
- Heat treatment to burn out organic i.e. starch or silane on tapes
- Used in places where no smokes allowed
- Highly flexible and minimal shrinkage
- Ideal tape used to wrap manifold ,header, turbo and exhaust
- Used at 1000¡ãF / 537¡ãC continuous
Heat treated fiberglass woven tape is widely accepted as standard practice for performance auto and racing applications. There are two reasons for this. First, by adding an insulation layer around the exhaust gas piping, it keeps the temperature of the gas from dropping, which means the density of the gas is kept lower longer, and lower density means easier flow through the exhaust system. Easier flow means more horse power due to reduced back pressure. Retaining heat in the exhaust flow, resulting in faster exhaust gas flow, also results in higher turbo charger spool speeds, resulting in a gain of horse power. Second,wrapping exhaust system components also reduces the temperature of other under-hood components and systems, reducing both radiated heat and convective heating of electrical components, intake air, fuel and hydraulic hoses. Reducing under-hood temperature also helps reduce hood paint thermal damage.
1000¡ãF / 537¡ãC continuous rating, high insulation value & excellent personnel protection
Specification
|
1000¡ãF / 537¡ãC: Heat Treated Fiberglass Woven Tape |
|||||
|
Part number |
Thickness (mm) |
Width (mm) |
Length (m) |
Weight (g/m2) |
Weave |
|
WFT110H |
1.0 |
20-200 |
30 |
800 |
Plain |
|
WFT115H |
1.5 |
20-200 |
30 |
1200 |
Plain |
|
WFT120H |
2.0 |
20-200 |
30 |
1400 |
Plain |
|
WFT125H |
2.5 |
20-200 |
30 |
1660 |
Plain |
|
WFT130H |
3.0 |
20-200 |
30 |
2000 |
Plain |
|
WFT160H |
6.0 |
20-200 |
30 |
4000 |
Plain |
WFT115H is the ideal thickness and most popular choice for Turbo& Exhaust wrap..
Other tapes for the same usage as WFT115H:
Vermiculite coated fiberglass tape, Graphite coated fiberglass tape, fiberglass woven tape.
Stainless Steel Free End Self Locking Clamps: Used to secure tape in place. Makes a neat low profile installation. (Standard hand tools can be used to tighten and cut the remaining free end)
¡¤ Size: 4.6mm W x 360mm L
