Alum glass fabric sewn sleeve with velcro
Radiant Heat Reflective Sleeve
Description
- Protection from intense radiant heat.
- Reflects more than 95% of the radiant heat that contacts its surface.
- Velcro closure allows the sleeve to be installed and removed from wire, cable, hose and pipe without disconnection.
- This sleeve is the perfect protection for cables and hoses when radiant heat from infrared sources such as super-hot metal slabs, proximity to liquid metal, open flame/plasma or engine exhaust manifolds is a concern.
Constructed from a high temperature base filament/texturized fiberglass fabric which is then coated with highly reflective polished aluminum. The aluminum foil coating melts at 1220¡ãF / 660¡ãC, however it does take some time for the aluminum foil to absorb enough heat to melt, thereby it can withstand short exposure to the higher temperatures. The basic fiberglass fabric is 1000¡ãF/537¡ãC, while adhesive will burn-off or vaporize at temperatures above 300¡ãF/148¡ãC.
The sleeve is fabricated from a roll fabric, and is then sewn with Velcro tape, allowing this sleeve to be installed and removed with disconnection of wiring, cables, hose and pipe. Sewing is performed with Kevlar or Fiberglass thread. The Velcro sleeve results in a circular sleeve profile when closed.
Specification
|
1000¡ãF / 537¡ãC: Aluminum Foil/Mylar Film Coated Fiberglass Velcro Sleeve Radiant Heat Reflective Sleeve |
||||
|
Part number |
Inner Diameter (inch) |
Inner Diameter (mm) |
Wall thickness (mm) |
Roll Length (ft) |
|
WFF208A-TV06 |
1/4 |
6 |
0.8¡À0.1 |
3/12 |
|
WFF208A-TV12 |
1/2 |
12 |
0.8¡À0.1 |
3/12 |
|
WFF208A-TV16 |
5/8 |
16 |
0.8¡À0.1 |
3/12 |
|
WFF208A-TV25 |
1 |
25 |
0.8¡À0.1 |
3/12 |
|
WFF208A-TV28 |
1 1/8 |
28 |
0.8¡À0.1 |
3/12 |
|
WFF208A-TV38 |
1 1/2 |
38 |
0.8¡À0.1 |
3/12 |
|
WFF208A-TV41 |
1 5/8 |
41 |
0.8¡À0.1 |
3/12 |
|
WFF208A-TV51 |
2 |
51 |
0.8¡À0.1 |
3/12 |
|
WFF208A-TV54 |
2 1/8 |
54 |
0.8¡À0.1 |
3/12 |
|
WFF208A-TV63 |
2 1/2 |
63 |
0.8¡À0.1 |
3/12 |
Basic fabric can be available by WFF208A, WFF210A, WFF215A, WFF220A
Other sizes are available by customer¡¯s request.
The same base fabric can be used for constructing a wide variety of protective sleeves and covers for EAF (Electric Arc Furnace) Cable Covers, Festoon covers, robotic welding machine covers, etc.
