Ceramic fiber ladder tape
Drop Warp tape Bolt Holt Tape
Description
- Ladder tape is made of wrap yarns missing in the center of tape, with just the weft yarns holding the remaining outside sections, give the tape looks like “ladder” and easy pass-thru over studs.
- Produced from an extremely pure alumina-silicate ceramic fiber
- An alternative to asbestos based textiles
- Used at 2300°F / 1260°C continuously, molts above 3000°F / 1650℃
- Available with a PSA (pressure sensitive adhesive) to facilitate easy installation
Common application of ladder tapes are used as gasket seal material on access doors for ovens, furnaces and kilns, where a gasket/seal is desired on both sides of the securing fasteners such as a bolt line. Ladder tape is also used on commercial kitchen exhaust duct flange joints as a sealing tape.
Specification
|
2300°F / 1260°C: Ceramic Fiber Ladder Tape |
|||||
|
Part number |
Thickness(mm) |
Width(mm) |
Length(m) |
Weight(g/m2) |
Reinforcement |
|
WCT120L – X |
2 |
20-200 |
30 |
880 |
Glass |
|
WCT220L – X |
2 |
20-200 |
30 |
880 |
Steel |
|
WCT130L – X |
3 |
20-200 |
30 |
1280 |
Glass |
|
WCT230L – X |
3 |
20-200 |
30 |
1280 |
Steel |
|
WCT150L – X |
5 |
20-200 |
30 |
2000 |
Glass |
|
WCT250L – X |
5 |
20-200 |
30 |
2000 |
Steel |
|
WCT160L – X |
6 |
20-200 |
30 |
2400 |
Glass |
|
WCT260L – X |
6 |
20-200 |
30 |
2400 |
Steel |
Thickness can be 4mm, 5mm, 6mm as well.
While the reinforced wire can be SS302, SS304, SS316, Nickel, etc.
For the “X” value, Specify “P” or “I” in part number to correspond to the desired grade.
“P” for Premium Grade / “I” for Industrial Grade
Premium Grade consists of premium ceramic fiber, E-glass filament, viscose fiber, SS304 wire.
Industrial Grade consists of ceramic fiber, fiberglass filament, chemical fiber, SS302 wire.
