PTFE mix P84 filter bag
Material:
P84 mixed PTFE punched felt
550gsm, 600gsm
Finish Treatment:
Singed, calendered, heat set.
Size:
diameter 100mm, 125mm, 130mm, 150mm, 180mm, 250mm ect.
Any length is available. Special size is customizable.
Process Method: sewing
Advantages:
a) high temperature resistant,
b) high strength,
c) anti-acid and alkali, anti-abrasion, anti-breaking
d) easily dedusting, water and oil proof
e) high filtration efficiency
Required information:
Since every filter has its own characteristics and parameters, when we chose fiter material for dust collector filter bags, we have to know the following parameters: temperature, humid, dust diameter, gas chemictal properties, dust abrasive, filter's mechanical parameters.
Generally, Our dust collector filter bags are widely used in industrial waste gas filtration, useful dust, high temperature gas filters.
Our filter bag factory provides you good solution according to dust characteristics, help you chose good filter material to achieve best filtering effective.
Application:
Mostly applied in Cement kiln, Asphalt, Waster Incinerator, coal boilers, etc.
Technical data:
| P84-PTFE high temperature resistant filtration material | |
| Construction | Needle felt |
| material | 90% P84 fiber, 10% PTFE fiber/PTFE scrim |
| Srim support | Yes |
| Felt Area Weight | 550g/sqm +/-5% |
| Thickness | 2..0mm |
| Mean Air Permeability | 11-15 m3/m2/min@12.7mmH2O |
| Breaking Strength-MD | 1500 N/5cm |
| Breaking Strength-CMD | 1500 N/5cm |
| Breaking Elongation( N/5cm)-MD | 20% |
| Breaking Elongation( N/5cm)-CMD£© | 40% |
| Dry Shrinkage MD£¨260¡æ£© | £¼1.5% |
| Dry Shrinkage CMD£¨260¡æ£© | £¼1.5% |
| Operating Temperatures | ¡Ü260 Degree deg C |
| Recommended Maximum Continuous | 260 Degreedeg C |
| Recommended Maximum Surge | 280 deg C |
| Finish | Singed,calendered,heatset,PTFE dipping |
