Alum foil tape

Self-wound alum foil tape


Product Guide

Product

Description

Application

WAF3025CW/WL

A nominal 30 micron (1.2 mil) release coated aluminum foil backing, combined with a high performance cold weather solvent acrylic adhesive.

Excellent for fixing copper tube of Freezers and Refrigerator. General purpose holding, patching, sealing and masking applications 每 indoors and outdoors.

WAF3025WL

A nominal 30 micron (1.2 mil) release coated aluminum foil backing, combined with a high performance solvent acrylic adhesive.

HVAC industry for joining and sealing Foil-Scrim-Kraft Facing laminated fiberglass blanket / duct board joints and seams; joining and sealing flexible air duct seams and connections. General purpose holding, patching, sealing and masking applications 每 indoors and outdoors.

WAF4025CW/WL

A nominal 40 micron (1.6 mil) silicone release coated aluminum foil backing, combined with a high performance cold weather solvent acrylic adhesive.

Excellent for fixing copper tube of Freezers and Refrigerator. General purpose holding, patching, sealing and masking applications 每 indoors and outdoors.

WAF4025WL

A nominal 40 micron (1.6 mil) silicone release coated aluminum foil backing, combined with a high performance solvent acrylic adhesive.

Excellent for fixing copper tube of Freezers and Refrigerator. General purpose holding, patching, sealing and masking applications 每 indoors and outdoors.

WAF5025CW/WL

A nominal 50 micron (2.0 mil) silicone release coated aluminum foil backing, combined with a high performance cold weather solvent acrylic adhesive.

Excellent for fixing copper tube of Freezers and Refrigerator. General purpose holding, patching, sealing and masking applications 每 indoors and outdoors.

WAF5025WL

A nominal 50 micron (2.0 mil) release coated aluminum foil backing, combined with a high performance solvent acrylic adhesive.

Excellent for fixing copper tube of Freezers and Refrigerator. General purpose holding, patching, sealing and masking applications 每 indoors and outdoors.

WAF7525WL

A nominal 75 micron (3.0 mil) silicone release coated aluminum foil backing, combined with a high performance solvent acrylic adhesive.

This product can be used as a water proofing vapor barrier and air leakage protection. High reflectivity assures effective heat light interference and electrical isolation shielding. Excellent 



Typical Physical Properties

Product

Backing

Adhesive

Thickness mm

Adhesion N/25mm

Tensile N/25mm

Elongation %

Service Temp∼C

WAF3025CW/WL

Foil 30u

Rubber-Resin

70

12

45

3

-30 ~ +120

WAF3025WL

Foil 30u

Rubber-Resin

70

12

45

3

-30 ~ +120

WAF4025CW/WL

Foil 30u

Rubber-Resin

80

12

55

3

-30 ~ +120

WAF4025WL

Foil 40u

Rubber-Resin

80

12

55

3

-30 ~ +120

WAF5025CW/WL

Foil 50u

Rubber-Resin

90

12

75

3

-30 ~ +120

WAF5025WL

Foil 50u

Rubber-Resin

90

12

75

3.5

-30 ~ +120

WAF7525WL

Foil 75u

Rubber-Resin

120

12

100

5

-40 ~ +149



PRODUCT FORM & SIZE AVAILABLE

Cut Roll:  48 / 50mm (2") / 60 / 63mm (2.5") / 72 / 75mm (3") / 96mm / 100mm (4")

Log Roll: 1200mm x 45 / 50m        Jumbo Roll: 1200mm x 750m / 800m

IMPORTANT NOTE

1. The data above are typical values only, and should not be used for specifications purpose.

2. Tolerance: Weight and Thickness: ㊣10%; Width: ㊣3mm; Length: Cut Roll: ㊣0.3m, Jumbo Roll ㊣0.5%.

STORAGE & SHELF LIFE12 months when stored at 21∼C (70∼F) / 50% relative humidity out of direct sunlight.

SURFACE PREPARATION: It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, free of grease, oil or other contaminants.

PRODUCT USE: It is essential that the user evaluate the TEXAL product to determine whether it is fit for a particular purpose and user*s method of application. Good results will be obtained when applied to a clean, dry surface with a suitable pressure on TEXAL products between +10 ~ +40∼C (+50 ~ +105 ∼F).