Vapor Barrier (Laminated Insulation Facing)
Foil-kraft facing & Foil-scrim-kraft facing
|
Product Guide |
||
|
Product |
Description |
Application |
|
WFK-705 |
Foil: 7u / PE / Kraft: 50gsm |
Utility grade Foil-Kraft Facing for duct wrap in HVAC system. No scrim inside. |
|
WFK-706 |
Foil: 7u / PE / Kraft: 60gsm |
Utility grade Foil-Kraft Facing for duct wrap in HVAC system. No scrim inside, thick Kraft.. |
|
WFSK-715A |
Foil: 7u / 3-way Scrim 8 x12 / 100mm / PE / Kraft: 50gsm |
Utility grade, 3-way scrim FSK Facing. Suitable for duct wrap and metal building as well as pipe insulation. |
|
WFSK-715B |
Foil: 7u / 2-way Scrim 12.5 x12.5mm / PE / Kraft: 50gsm |
Utility grade, 2-way scrim FSK Facing. Suitable for duct wrap and metal building as well as pipe insulation. |
|
WFSK-716A |
Foil: 7u / 3-way Scrim 8 x12 / 100mm / PE / Kraft: 60gsm |
Commercial grade, 3-way scrim FSK Facing. Suitable for duct wrap and metal building as well as pipe insulation. Thick Kraft. |
|
WFSK-716B |
Foil: 7u / 2-Way Scrim 12.5 x12.5mm / PE / Kraft: 60gsm |
Commercial grade, 2-way scrim FSK Facing. Suitable for duct wrap and metal building as well as pipe insulation. Thick Kraft. |
|
WFSK-718A |
Foil: 7u / 3-way Scrim 8 x12 / 100mm / PE / Kraft: 80gsm |
High-grade, 3-way scrim FSK Facing. Good for duct wrap and metal building as well as pipe insulation. Thicker Kraft and higher strength. |
|
WFSK-718B |
Foil: 7u / 2-way Scrim 12.5 x12.5mm / PE / Kraft: 80gsm |
High-grade, 2-way scrim FSK Facing, Good for duct wrap and metal building as well as pipe insulation. Thicker Kraft and higher strength. |
|
WFSK-R715A |
Foil: 7u / 3-way Scrim 8 x12/100mm / FR Glue / Kraft: 50gsm |
Utility F/R Grade, 3-way scrim FSK Facing,. Suitable for duct wrap and metal building as well as pipe insulation. Good fire rating. |
|
WFSK-R715B |
Foil: 7u / 2-way Scrim 12.5x12.5mm / FR Glue / Kraft: 50gsm |
Utility F/R Grade, 2-way scrim FSK Facing. Suitable for duct wrap and metal building as well as pipe insulation. Good fire rating. |
|
WFSK-R716A |
Foil: 7u / 3-way Scrim 8 x12/100mm / FR Glue / Kraft: 60gsm |
Commercial F/R Grade, 3-way scrim FSK Facing. Suitable for duct wrap and metal building as well as pipe insulation. Good fire rating and thick Kraft. |
|
WFSK-R716B |
Foil: 7u / 2-way Scrim 12.5x12.5mm / FR Glue / Kraft: 60gsm |
Commercial F/R Grade, 2-way scrim FSK Facing. Suitable for duct wrap and metal building as well as pipe insulation. Good fire rating and thicker Kraft. |
|
Typical Physical Properties |
|||||||
|
Product |
Basic Weight |
wvtr ng/N.s |
Tensile MD N/25mm |
Tensile XD N/25mm |
Burst Strength |
Fire Rating |
-- |
|
WFK-705 |
75 |
5.75 |
85 |
50 |
20 |
-- |
-- |
|
WFK-706 |
85 |
5.75 |
105 |
55 |
20 |
-- |
-- |
|
WFSK-715A |
85 |
5.75 |
115 |
50 |
30 |
-- |
-- |
|
WFSK-715B |
85 |
5.75 |
115 |
55 |
30 |
-- |
-- |
|
WFSK-716A |
95 |
5.75 |
130 |
60 |
30 |
-- |
-- |
|
WFSK-716B |
95 |
5.75 |
130 |
70 |
30 |
-- |
-- |
|
WFSK-718A |
115 |
5.75 |
150 |
75 |
40 |
-- |
-- |
|
WFSK-718B |
115 |
5.75 |
150 |
80 |
40 |
-- |
-- |
|
WFSK-R715A |
78 |
5.75 |
115 |
50 |
30 |
Class 0 |
-- |
|
WFSK-R715B |
78 |
5.75 |
115 |
55 |
30 |
Class 0 |
-- |
|
WFSK-R716A |
88 |
5.75 |
130 |
60 |
30 |
Class 0 |
-- |
|
WFSK-R716B |
95 |
5.75 |
130 |
70 |
30 |
Class 0 |
-- |
PRODUCT FORM & SIZE AVAILABLE
Cut Roll: 48 / 50mm (2") / 60 / 63mm (2.5") / 72 / 75mm (3") / 96mm / 100mm (4")
Log Roll: 1200mm x 45 / 50m Jumbo Roll: 1200mm x 750m / 800m
IMPORTANT NOTE
1. The data above are typical values only, and should not be used for specifications purpose.
2. Tolerance: Weight and Thickness: ¡À10%; Width: ¡À3mm; Length: Cut Roll: ¡À0.3m, Jumbo Roll ¡À0.5%.
STORAGE & SHELF LIFE: 12 months when stored at 21¡ãC (70¡ãF) / 50% relative humidity out of direct sunlight.
SURFACE PREPARATION: It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, free of grease, oil or other contaminants.
PRODUCT USE: It is essential that the user evaluate the TEXAL product to determine whether it is fit for a particular purpose and user¡¯s method of application. Good results will be obtained when applied to a clean, dry surface with a suitable pressure on TEXAL products between +10 ~ +40¡ãC (+50 ~ +105 ¡ãF).
