Vapor Barrier (Laminated Insulation Facing)
PP-scrim-kraft facing&all service jacket
Product Guide |
||
Product |
Description |
Application |
WASJ-758A |
Foil: 7u / 3-way Scrim 20x16/100mm / FR Glue / White Kraft: 80gsm |
Outstanding mechanical strength and low WVTR. Excellent jacket and vapor barrier for pipe insulation. |
WBPSK-455A |
Black PP Film / 3-way Scrim / PE / Kraft: 50gsm |
Commercial grade PSK facing for metal building insulation and duct wrap where request black surface. |
WWPSK-453A |
White PP Film / 3-way Scrim / PE / Kraft: 38gsm |
Utility grade PSK facing for metal building insulation and duct wrap. |
WWPSK-455A |
White PP Film / 3-way Scrim / PE / Kraft: 50gsm |
Commercial Grade PSK facing for metal building insulation and duct wrap. |
WWPSKM-4512A |
White PP Film / 3-way Scrim / PE / Kraft: 50gsm / Glue / MPET: 12u |
High-grade PSKM facing for metal building insulation and duct wrap as well as duct board. |
Typical Physical Properties |
|||||||
Product |
Basic Weight |
wvtr ng/N.s |
Tensile MD N/25mm |
Tensile XD N/25mm |
Burst Strength |
Fire Rating |
-- |
WASJ-758A |
135 |
1.15 |
180 |
85 |
50 |
-- |
-- |
WBPSK-455A |
100 |
1.15 |
200 |
135 |
65 |
-- |
-- |
WWPSK-453A |
85 |
1.15 |
185 |
120 |
50 |
-- |
-- |
WWPSK-455A |
85 |
1.15 |
160 |
105 |
65 |
-- |
-- |
WWPSKM-4512A |
85 |
1.15 |
175 |
100 |
65 |
-- |
-- |
PRODUCT FORM & SIZE AVAILABLE
Cut Roll: 48 / 50mm (2") / 60 / 63mm (2.5") / 72 / 75mm (3") / 96mm / 100mm (4")
Log Roll: 1200mm x 45 / 50m Jumbo Roll: 1200mm x 750m / 800m
IMPORTANT NOTE
1. The data above are typical values only, and should not be used for specifications purpose.
2. Tolerance: Weight and Thickness: ¡À10%; Width: ¡À3mm; Length: Cut Roll: ¡À0.3m, Jumbo Roll ¡À0.5%.
STORAGE & SHELF LIFE: 12 months when stored at 21¡ãC (70¡ãF) / 50% relative humidity out of direct sunlight.
SURFACE PREPARATION: It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, free of grease, oil or other contaminants.
PRODUCT USE: It is essential that the user evaluate the TEXAL product to determine whether it is fit for a particular purpose and user¡¯s method of application. Good results will be obtained when applied to a clean, dry surface with a suitable pressure on TEXAL products between +10 ~ +40¡ãC (+50 ~ +105 ¡ãF).