Glass ladder tape
Description
- Ladder tape is made of wrap yarns missing in the center of tape, with just the weft yarns holding the remaining outside sections, give the tape looks like ¡°ladder¡± and easy pass-thru over studs.
- An alternative to asbestos based textiles
- Used at 1000¡ãF / 537¡ãC continuous, If exposed to high temperature 600¡ãF (315¡ãC) to 1000¡ãF (537¡ãC) for an extended period of time the fabric may become stiff and brittle.
- Available with a PSA to facilitate easy installation
Available with specialty coatings such as Adhesive back, Dyeing, Graphite, Heat treatment, Vermiculite, Wire insert, etc.
Common application
Ladder tapes are used as gasket seal material on access doors for ovens, furnaces and kilns, where a gasket/seal is desired on both sides of the securing fasteners such as a bolt line. Ladder tape is also used on commercial kitchen exhaust duct flange joints as a sealing tape.
1000¡ãF / 537¡ãC continuous rating, high insulation value & excellent personnel protection
Specification
|
1000¡ãF / 537¡ãC: Fiberglass Ladder Tape Drop Wrap Tape Bolt Hole Tape |
|||||
|
Part number |
Thickness(mm) |
Width(mm) |
Length(m) |
Weight(g/m2) |
Reinforcement |
|
WFT210 |
1.0 |
20-200 |
30 |
640 |
Plain |
|
WFT215 |
1.5 |
20-200 |
30 |
960 |
Plain |
|
WFT220 |
2.0 |
20-200 |
30 |
1120 |
Plain |
|
WFT225 |
2.5 |
20-200 |
30 |
1328 |
Plain |
|
WFT230 |
3.0 |
20-200 |
30 |
1600 |
Plain |
|
WFT250 |
5.0 |
20-200 |
30 |
2560 |
Plain |
|
WFT260 |
6.0 |
20-200 |
30 |
3200 |
Plain |
The ladder section width is 1/4 of tape width in our standard, also can be customized sizes.
Fiberglass products are resistant to oils, solvents and most chemicals although contact with hydrofluoric acids, strong alkalis and live steam should be avoided.
